Editing Stitches/Letters; Removing Stitches/Letters; Opening And Sewing A Stitch Memory; Stitch Elongation - Viking Emerald 203 User Manual

Editing Stitches/Letters

1. In the memory mode, use the stitch width or
length buttons + and - to place the cursor at the
stitch you wish to edit.
2. Touch the "E" button to edit the stitch. The
background of the stitch you wish to edit becomes
black (B). You can adjust the width, length, mirror
the stitch and on some stitches, elongate the stitch.
3. Touch the "E" button again to return to the
memory mode.

Removing Stitches/Letters

1. In the memory mode, use the stitch width or
length buttons to go to the stitch you wish to
delete. The machine will delete the stitch the
cursor is under.
2. Touch the "C" button to delete the stitch that you
have selected. The stitch behind the one that you
have deleted will move forward.

Opening and Sewing a Stitch Memory

1. Go into the memory mode by touching the "M"
button.
2. Choose the number of the memory you wish to
enter and the memory will open.
3. Start to sew by pressing the foot control. The
cursor on the display will move along with the
stitch while sewing.
Note: Once you have reached the end of the sequence the
machine will start over again from the beginning unless you have
programmed a stop. The machine will start to sew the stitch
where the cursor is.

Stitch Elongation

To elongate a stitch means that you make the stitch
longer without changing the stitch density. You can
elongate the following stitches:
3:14, 3:15, 3:16, 4:01, 4:02 and 4:04.
You can elongate the stitch up to fi ve times its normal
length. When you press the stitch elongation button
you will see the following display. The stitch on the
screen will change according to your changes.
32
B