Movie Vision MV-VS1 Installation And User Manual

Advertisement

The MV-VS1 is a mechanical video and audio switching device used to increase the number of inputs to the VCR providing greater
system flexibility and ease of use. Follow the enclosed diagrams to make proper connections.

Installation

The MV-VS1 has 3-way mounting capability. It can be mounted
under the dash or under a ledge, on the floor or on top of a ledge
and it can also be panel mounted in a cabinet, console or wall.
Installation Notes:
1. Choose a mounting location that provides easy access by
the end user.

Surface Mounting:

Use the "L" brackets provided to secure the MV-VS1 into place.
The brackets can be placed at the top of the MV-VS1 cabinet for
under dash or under ledge mounting or at the bottom of the cab-
inet for floor or surface mounting. DO NOT mount the MV-VS1
on uneven surfaces which will cause the brackets or chassis to
bend or flex excessively.

Under Dash Mounting

o G
V id e
V
C a m
Surface Mounting
o G
V id e
V
C a m
1111 West Victoria Street
Compton, CA 90220
Installation and User Manual
A u x In
R e a r
G a m
V id e o
r
c o rd e
C a m
t
I n p u
a m e
L
R
e o
S -V id
r
c o rd e
C a m
p u t
e r I n
c o r d
A u x In
R e a r
G a m
V id e o
c o rd e
r
C a m
t
I n p u
a m e
L
R
e o
S -V id
r
c o rd e
C a m
p u t
e r I n
c o r d
2061 Cohen Street
Montreal, Quebec H4R 2N7
2. Choose a solid mounting surface that will withstand the
pulling and pushing force when the end user is plugging in
and disconnecting devices.
3. If panel mounting, follow the recommendations in point #2.
The mounting surface must be able to withstand the pulling
and pushing force.

Panel Mounting:

Remove the "L" brackets from the MV-VS1 housing and slip on the
panel mount adapter. Use the screws you removed from the "L"
brackets to secure the panel mount adapter to the MV-VS1 chassis.
You must cut a hole in the mounting surface approximately 5" x
1-3/4" in size.
Hole Opening
e
Panel Mounting
e
Model: MV-VS1
1
3
/
"
4
5"
r
c o rd e
C a m
t
I n p u
a m e
o G
V id e
L
R
e o
V
S -V id
r
c o rd e
C a m
p u t
e r I n
c o r d
C a m
© 2000 Copyright Magnadyne Corporation
A u x In
R e a r
e
G a m
V id e o
MV-VS1INS Rev.A 5-17-00

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MV-VS1 and is the answer not in the manual?

Questions and answers

Summary of Contents for Movie Vision MV-VS1

  • Page 1: Surface Mounting

    Installation and User Manual The MV-VS1 is a mechanical video and audio switching device used to increase the number of inputs to the VCR providing greater system flexibility and ease of use. Follow the enclosed diagrams to make proper connections.
  • Page 2 VCR must be turned on and if there is a tape insert- ed it must be stopped or ejected. 2. The “Rear Aux Input” of the MV-VS1 is typically reserved for permanent items that will not be removed from the vehicle Note for MovieVision System 1002 : The VCR input selection such as a video game controller, DVD or second VCR.

Table of Contents