Shelves - GE TBX18 Use And Care Manual

Shelves
How to rearrange
your shelves
Adjustable Shelves in
Fresh Food Compartment
(on models
so
equipped)
Some models have adjustable
shelves in the fresh food compart-
ment, enabling you rearrange the
shelves
to fit
your family's food
storage needs.
To remove shelves:
Tilt shelf up
at front, then lift
it
up and out o f
tracks on rear wall of refrigerator.
To replace shelves: Select desired
shelf height. With shelf front raised
slightly, engage top lugs in tracks
at rear of cabinet. Then lower front
o f shelf until it locks into position.
Tempered glass shelves (on models
so equipped) are adjustable in the
same manner.
Spacemaker Door
(on models so equipped)
Deep shelves on doors o f General
Electric refrigerators provide
convenient storage for frequently-
used items.
Deeper shelves on Spacemaker
Doors can accommodate a two-liter
bottle on the bottom shelf and a
six-pack on the shelf above
it.
Snuggeds), on models so
equipped, are designed
to
give
you storage flexibility on your
fresh food door. Salad dressing,
steak sauces and other condi-
ments can now be kept securely
against the door liner to help pre-
vent tipping, spilling and sliding.
For most efficient operation, place
index finger and middle finger on
either side of snugger and move it
back and forth to fit your needs.
Two-Position Shelf in
Freezer Compartment
(on models so equipped)
To remove shelf:
Lift shelf off shelf
supports, tilt it, and take
it
out.
To relocate shelf:
1. After removing shelf. remove
shelf supports by sliding them
upward and replace them on other
set of mounts.
2. Lower shelf onto relocated
supports.
Partial-Width Shelf in
Freezer Compartment
(on models so equipped]
To relocate this shelf against the
opposite wall:
1. Remove shelf.
2. Remove shelf supports by
sliding them upward and replace
them on mounts on opposite wall.
3. Replace shelf with legless end
on repositioned supports.
7