Basic Operation; To Listen To Music - Pioneer MEH-P7300R Operation Manual

Basic Operation

To Listen to Music

The following explains the initial operations required before you can listen to music.
Note:
• Loading a disc in this product. (Refer to page 14.)
1. Select the desired source (e.g. Tuner).
EQ
SOURCE
DISP
Each press changes the Source ...
Each press of the SOURCE button selects the desired source in the following order:
CD player (one disc only) = TV = Tuner = DAB (Digital Audio Broadcasting) Tuner
= Built-in MD player = Multi-CD player = External Unit 1 = External Unit 2 = AUX
= Telephone standby
Note:
• External Unit refers to a Pioneer product (such as one available in the future) that, although incom-
patible as a source, enables control of basic functions by this product. Two External Units can be
controlled by this product, although "External" is displayed whether you select External Unit 1 or
External Unit 2. When two External Units are connected, the allocation of them to External Unit 1
or External Unit 2 is automatically set by this product.
• In the following cases, the sound source will not change:
* When a product corresponding to each source is not connected to this product.
* When no MD is set in this product.
* When no disc is set in the CD player (one disc only).
* When no magazine is set in the Multi-CD player.
* When the AUX (external input) is set to OFF. (Refer to page 53.)
* When the Telephone standby is set to OFF. (Refer to page 56.)
• When this product's blue/white lead is connected to the car's Auto-antenna relay control terminal,
the car's Auto-antenna extends when this product's source is switched ON. To retract the antenna,
switch the source OFF.
2. Extend the VOLUME forward.
EQ
When you press the VOLUME, it extends forward so that it becomes easier to roll. To
retract the VOLUME, press it again.
1 2 3 4 5 6
Continued overleaf.
10