Page 1
TRANSOM MOUNT T R A N S D U C E R S Installation Manual Mk3 Transom Mount Dual Frequency Aquaducer (depth 200/50 kHz, speed, Aquaducer (depth, speed, temperature transducer) temperature transducer) Mk2 Transom Mount Mk2 Transom Mk3 Transom Mount Depth...
Page 2
Connect the equipment into an output on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced technician for help. A shielded cable must be used when connecting a peripheral to the serial ports. Transom Mount Transducers Installation Manual...
Page 3
If installation is not correct, the unit can not perform at its designed potential. If in doubt, consult your NAVMAN dealer. Ensure that any holes cut are in a safe position and will not weaken the boat’s structure. If in doubt, consult a qualified boatbuilder.
Page 4
(after bolt more. adjusting and testing) Note: The face of the transducer should Screw transducer onto face forward by about 7 degrees when the transom boat is moving. Pivot bolt Transom Mount Transducers Installation Manual...
• If necessary, extend the cable by adding a installation manual for instructions on how NAVMAN 13 ft (4 m) extension cable (a to connect the cable to the instrument. Adjusting and testing Adjust and test the transducer after the best high speed performance.