Replacing The Doors - GE Profile 200D8074P009 Owner's Manual

Models 23, 25, 26, 27 and 29
Table of Contents

Advertisement

Available languages

Available languages

REMOVE THE
8
REFRIGERATOR DOOR (cont.)
D
Lift the refrigerator door up and off the
bottom hinge.
If the refrigerator has a refreshment
center, one person should slowly lift the
door up and off the bottom hinge and the
second person should carefully guide the
electrical lines (harnesses) through the
bottom hinge.
90°
Refreshment Center Models Only
E
Set the door on a non-scratching surface
with the inside up.
Installation Instructions
27

REPLACING THE DOORS

9
To replace the doors, simply reverse
steps 3 through 8.
However, please note the following:
• When lowering the doors onto the
bottom hinges, make sure the second
person carefully guides the tube and
harnesses through the holes in the
hinges.
• When connecting the water line, make
sure you insert the tubing all the way
to the mark.
• Do not pinch the tubing and harnesses
when placing the doors on the bottom
hinges.
• When connecting the power line and
the electrical lines (refreshment center
models only), be sure that the
connectors are seated together fully.
Mark

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Profile 49-60456

Table of Contents