Table of Contents
Advertisement
chapter 4
MobilePre Software Control Panel
The Software Control Panel allows you to adjust
settings such as latency and sample rate.
The Software Control Panel is available
after the MobilePre drivers have been
installed as described in Chapter 3,
"MobilePre Installation".
Accessing the Control Panel
Windows
Double-click the M-Audio logo
system tray, generally located at the bottom
right of your Windows desktop.
Mac OS X
The MobilePre Control Panel can be found in
System Preferences, under "Other."
Latency Tab (Windows)
Latency is the time it takes for an input signal to
pass through your audio software and appear at
the outputs. This can result in a delay when
located in the
overdubbing to existing tracks.
The latency slider lets you adjust the buffer size
in units of samples. The default buffer size is 256
samples.
Smaller buffer sizes result in lower latency, but
may cause clicks, pops and dropouts on slower
systems. If you are experiencing clicks and pops
in your audio, try increasing the buffer size.
ASIO applications must be closed before
this setting can be adjusted.
Mac OS X
In Mac OS X, the buffer size is normally adjusted
within the audio preferences of your music soft-
ware. For more information, refer to the docu-
mentation for your software.
Chapter 4: MobilePre Software Control Panel
9
Hide quick links:
Advertisement
Table of Contents
