Using The Zoom - Sanyo Xacti VPC-HD1AEX Instruction Manual

USING THE ZOOM

Your camera has two zoom functions: optical zoom and digital zoom.
You can specify whether or not the digital zoom is enabled (page 130).
1
Point the camera lens at the
subject.
2
Press [T] or [W] on the zoom
switch to compose the desired
image.
[T]: Zoom in on the subject.
[W]: Zoom out.
h When the zoom switch is
pressed, the zoom bar appears
on the monitor.
h When moving the optical zoom,
press the zoom switch lightly to
zoom slowly, and press more
strongly to zoom quickly.
h When the optical zoom factor is at
maximum, zooming stops
temporarily. When the zoom
switch is pressed toward the [T]
side again, the mode changes to
the digital zoom mode and
zooming continues.
3
Take the picture.
For video clip recording, see page 42.
For shooting single shots, see page 46.
For shooting sequential shots, see page 52.
Zoom switch
Monitor
When both
optical and digital
zoom are enabled
Optical zoom
Digital zoom (yellow)
When optical
zoom only is
enabled
English
Zoom bar
Magnification
Pointer
60