Controls & Features - Troy-Bilt Horse Tiller Operation Manual

Controls & Features
Tines/PTO Clutch Lever
Tiller controls and features are described below and illustrated in
Fig. 4-1.
WARNING!
Be familiar with all the controls and
their proper operation. Know how to stop the
machine and disengage it quickly.
NOTE: For detailed information on all engine controls refer to the
separate Engine Operator's Manual.
Wheels/Tines/PTO Drive Lever
Use the Wheels/Tines/PTO Drive Lever to engage and disengage
power to the transmission.
Forward Interlock Levers
The Forward Interlock Levers are attached under the handlebar
grip and will stop the engine if both levers are released.
Wheel Speed Lever
The Wheel Speed Lever controls the speed at which the wheels
spin.
Handlebar Height
Adjustment Lever
Figure 4-1
Tines/PTO Clutch Lever
The Tines/PTO Clutch Lever is used to engage or disengage
power to the transmission.
Depth Regulator Lever
The Depth Regulator Lever is used to regulate the tilling depth
of the tines.
Handlebar Height Adjustment Lever
The Handlebar Height Adjustment Lever is used to adjust the
handlebars to one of two heights.
Engine Throttle Lever
Use the throttle lever to adjust engine speed as well as to start
and stop the engine.
Keyswitch Starter (If So Equipped)
The keyswitch starter on electric start models is used to start, run
and stop the tiller.
Wheels/Tines/PTO
Drive Lever
Depth Regulator
Lever
Wheel Speed Lever
4
Forward
Interlock
Levers
13