Table of Contents
Advertisement
Placing a Call on Hold
You can place the current call on hold at any point during a
conversation. You can also make another call while you have
a call in progress if your network supports this service.
1. While on a call, tap Hold
the current caller on hold.
2. You can later reactivate this call by tapping Unhold
.
Unhold
To make a new call while you have a call in progress
1. Tap Hold
.
Hold
2. Tap Add call
to display the dialer.
3. Enter the new number and tap
Once connected, the active call will appear in a large
box at the top of your screen and the call on hold will
appear in a smaller box in the middle of your screen.
57
. This action places
Hold
.
Switching Between Calls
When you have an active call and a call on hold, you may
switch between the two calls, changing the one on hold to
active and placing the other on hold.
1. Tap Swap.
The current call (caller #2) is placed on hold and the
previous call on hold (caller #1) is then reactivated so
that you can cont inue conversing with that person. The
active call will appear in a green box.
2. Tap
to end the currently active call.
To end a specific call
1. Tap Swap until the call you want to end appears in a
green box.
2. Tap
to end the specific call.
3. Tap
to end the remaining call.
To answer a call while you have a call in progress
1. Tap
and slide to the right to answer another call.
2. Tap Putting "Name/Number" on hold to put the first call
on hold.
– or –
Advertisement
Table of Contents
