Table of Contents
Advertisement
2. Tap Network operators.
3. Tap Default setup.
4. Tap Manual to locate and connect to a network
manually, or tap Automatic to allow the device to
automatically select a network.
Search for AT&T MicroCell
If you have purchased the AT&T Microcell you can set your
network to use it.
1. From the Home screen, tap
Connections
More networks
Network operators.
2. Tap Search for AT&T MicroCell.
3. Follow the on-screen instructions.
Note: For additional information please contact your AT&T
service representative.
VPN settings
Important! Before you can use a VPN you must establish and
Adding a Basic VPN
Settings
Connections
Mobile networks
The VPN settings menu allows you to set up and manage
Virtual Private Networks (VPNs).
configure one.
Before you add a VPN you must determine which VPN
protocol to use: PPTP (Point-to-Point Tunneling Protocol),
L2TP(Layer 2 Tunneling Protocol)/IPSec PSK (Pre-shared key
based L2TP/IPSec), L2TP/IPSec RSA (Public key based L2TP/
IPSec), IPSec Xauth (Cross authentication) PSK, IPSec Xauth
RSA, or IPSec Hybrid (authentication) RSA.
1. Before using VPN, you must first set up a screen unlock
PIN or password. For more information, refer to "Lock
Screen Settings" on page 100.
2. From the Home screen, tap
Connections
More networks
3. Tap Basic VPN.
4. Tap
Add.
5. Enter a name for the VPN network in the Name field.
Settings
Connections
VPN.
Changing Your Settings
92
Advertisement
Table of Contents
