How To Install The Unit - Sanyo SPW-FTR124EH56 Installation And Operation Manual

3. HOW TO INSTALL THE UNIT

Minimum operation and maintenance area. (fig. 4-1)
3000
250 250
250 250
Fig. 3-2
3000
max 400
Fig. 3-1
Find the place for the installation. The unit can be connec-
ted in four different positions: at the right-back side, at the
left-back side, at the botton on the right or on the left. (fig. 3-
2)
Floor installation.
Bend the fullscall diagram, level it and mark the holes to
drill (pipes, condensate drain pipe, cradle). (fig. 3-3)
Wall installation.
Place the fullscall diagram, level it and mark the holes to
drill (pipes and rawl plugs).(fig. 3-4)
Under ceiling installation.
Place the fullscall diagram and mark the holes to drill (pipes
on vertical wall or under-ceiling, condensate drain pipe, rawl
plugs).
In this case the drainage-tube connection cannot be execu-
ted on the back.(fig. 3-5)
Fig. 3-3
Fig. 3-5
Fig. 3-4
6