Niles SI-1230 Series 2 Installation Manual page 22

INSTALLATION
BUSmATRIx ™ INpUT SwITCh SETTING
Each channel has a dedicated BusMatrix™ DIP switch that assigns that
channel's source. To assign a signal from the Main Bus Input, select one of the
first three switches which will give you either Left (L), Right (R) or Mono (L+R). To
assign the channel's dedicated input select the fourth switch. Only ONE switch
should be selected to the "ON" position.
STEp
move only one switch to the "on" position
for each channel.
22
"OFF" Position
L
R
DESCrIpTIon
ICaUTIon! The DiP switch physically allows you to move all
four of the switches to the "on" position. if you accidentally
set more than one switch "on", you will create an
undesirable mix of inputs on the entire bus.
"ON" Position
WWW.NILESAUDIO.COM