Miele W 487 WPS Operating Instructions Manual page 70

If an additional option(s) is selected
for a programme, and / or the spin
speed is altered, the machine stores
these changes in memory at the start
of a programme.
When that particular programme is cho-
sen again, the display will show the ad-
ditional option(s) and / or spin speed
which have been stored for that
programme in the memory.
The washing machine is delivered with
the memory function deactivated.
A
The programmable functions are acti-
vated to call up further features not
shown on the control panel by using the
additional option buttons in combina-
tion with the programme selector.
Before you begin, first ensure that:
– The washing machine is switched off.
– The drum door is closed.
– The programme selector is at Finish .
70
G
A Press the additional option buttons
Rapid and Water plus at the same
time, hold pressed in and .
B . . . switch the machine on with the
I-On/0-Off button.
C Let go of all these buttons. P 0 ap-
pears in the display.
D Turn the programme selector to Sep-
arate rinse :
E The P will now flash in the display al-
ternating with the number 11
In addition, one of the following will ap-
pear on the right of the display:
0 = Memory function is deactivated
1 = Memory function is activated
F Press the START button to change
from one to the other. The display will
change accordingly from 0 to 1 or
from 1 to 0.
G Switch the washing machine off with
the I-On/0-Off button.
The setting you have selected is now
stored in memory and will remain so un-
til you alter it.