Miele W 487 WPS Operating Instructions Manual page 47

The washing machine will still oper-
ate with no lighting in place or if the
lighting is faulty.
^ Remove the yellow lever from behind
the detergent drawer facia panel as
described previously.
^ Switch the washing machine on and
open the drum door.
^ Now disconnect the washing ma-
chine from the electricity supply, see
"Warning and Safety instructions".
^ Insert the lever into the slot in the
drum lighting unit (see illustration)
and turn anti-clockwise (a quarter
turn) until you feel a resistance.
^ Pull out the loosened unit with your
fingers.
^ Press the two prongs to separate the
plastic holder
cover .
^ Remove the faulty lamp from the
plastic holder.
from the protective
The new lamp must be of the same
type (G4) with a maximum power
output of 5 watts/12 volts.
The lamps are available from an electri-
cal retailer, your Miele Dealer or from
the Miele Spare Parts Department.
^ Insert the new lamp into the plastic
holder.
^ Carefully fit the plastic holder and the
protective cover together.
^ Insert the lighting unit back into the
socket and turn it clockwise to secure
it.
It is absolutely essential for the cor-
rect functioning of the washing ma-
chine that the drum lighting unit is
fitted correctly in position.
47