Touchscreen Driver - Motorola ML900 Operation Manual

NOTE: An extensive on screen instructions is provided, follow the steps outlined to
install the driver.
Bluetooth

Touchscreen Driver

To install the touch screen driver, perform the following:
1. Insert the driver CD into the drive.
2. Click on "Windows 2K", then "Touchscreen" and follow the onscreen
instructions to continue.
3. When finished installing, select "Yes" to reboot your system. The driver
should now be loaded.
4. After the system has finished rebooting, click on the "PenMount Monitor"
icon located on the taskbar to bring up the "PenMount Control Panel".
5. Select the "Standard Calibrate" folder and click on "OK."
6. Click on "Advanced Calibrate" button.
7. Click on the four sides (points) and the plus-sign "+" on the screen to
calibrate your touchscreen for use on the computer.
6-6
Allows you to use the bluetooth port to connect to
bluetooth-compliant devices.
Installing Software Drivers