Display Problems - Motorola ML900 Operation Manual

You cannot eject a CD.
The CD is not properly seated in the drive. Manually release the CD
following the method described next:
1. Turn off the system.
2. Insert a small rod, such as a straightened paperclip, into the
drive's manual eject hole and push firmly to release the tray.
3. Pull the tray out until fully extended, and then remove the CD.

Display Problems

Nothing appears on the screen.
If the power-on indicator is not on, check the electrical outlet, the
plugs and power cords.
If the power button does not respond to a light touch, press the button
firmly.
If you are using battery power, make sure that it has a charge
remaining and that it is installed correctly.
During operation, the screen may automatically turn off as a result of
power management. Press any key to see if the screen comes back.
Troubleshooting 8-5