Miele KF 1801 Vi Operating And Installation Manual page 83

When fitting the drawer front, bear in
mind the gap between the drawer and
door fronts:
^ Measure gap Y between the
adjusting bar on the freezer drawer
and the refrigerator door.
^ A gap of 3 mm needs to be
maintained between the drawer and
refrigerator door.
Fitting the fixing brackets
The fixing brackets are used to secure
the furniture fronts to the freezer drawer
at the bottom.
^ Open the freezer drawer as far as it
will go.
^ Loosen the screws (1).
^ Position the fixing bracket on the
appliance door
in the furniture front.
^ Screw the fixing bracket securely to
the furniture front (3).
^ Now tighten the screws (4).
^ Fit the cover to the fixing bracket (5).
The number of fixing brackets required
will depend on the material and width of
the furniture front.
Installation
and pre-drill a hole
83