Page 2
Dear Friends and Fellow Percussionists, Thank you for purchasing your Hart Dynamics Electracoustic Percussion Product. You have purchased one of the finest Instruments avail- able, and are assured of years of trouble free operation. We at Hart Dynamics, are dedicated to providing the finest products and services available, and continue to design our products with quality, playabili- ty, ease of set-up, and compatibility being our foremost concerns.
Page 3
HART DYNAMICS MEGAPRO DRUMSET TE3.2 IMPORTANT! THANK YOU FOR PURCHASING HART DYNAMICS ELECTRACOUSTIC PERCUSSION PRODUCTS IF YOU HAVE ANY TECHNICAL QUESTIONS OR BELIEVE YOUR ARE MISSING COMPONENTS, PLEASE CHECK YOUR QUALITY CONTROL CHECK LIST (NEXT PAGE) AND REVIEW YOUR OWNERS DOCUMENTATION.
DRUM RACK SET-UP YELLOW Cymbal Spring is for RIDE CYMBAL. Felts and Wing Nut are includ- ed and may also be used for RIDE CYMBAL. RED Cymbal Spring(s) for CRASH CYMBAL(s). Although felts and Wing Nut are included for Crash Cymbals, we highly recommend using the springs for enhanced feel and to keep Crash...
Page 6
Introduction Your Hart Dynamics Electracoustic® Drum System is the result of years of research and develop- ment and represents the most comprehensive electronic drum system available. Easy enough to use for the beginning drummer with features that allow the most advanced user flexibility never before available.
Page 7
Installing Drums and Cymbals There are as many ways to configure your drum set as there are drummers. Our HARTWARE or ULTILITE rack and mounting system will allow you to position each drum and cymbal to suit your taste. The information below should be used with the Features and Set-up sheet supplied with each instrument for best results.
Page 8
IMPORTANT! It is VERY IMPORTANT that enough slack is provided for crash and splash cymbals which move up and down and that cable is not just hanging from the cymbal. This may cause jack failure, bend trig- ger housing, and cause intermittent triggering. When installing cable, bend cymbal to full extension and attach cable to stand.
Page 9
������������������������������������������ This set-up is used for Hart Dynamics Studio �� ����� ���� Master, Studio Master 5.3, Custom A, MegaPro ��� ����� ���� and Hart Pro 5.3 Drumsets. With this configuration, the Ride and Bell triggers on the ride cymbal are plugged in to 2 separate inputs via the Y cable.
Page 11
���������������������������������������� This set-up is used for ������ ��� ��� ���� ��� ����� Hart Dynamics Studio � � ���� � ����� Master, Studio Master 5.3, Custom A, Mega Pro and Hart Pro 5.3 Drumsets. With this configuration, the Ride and Bell triggers on the ride cymbal are plugged in to 2 separate inputs via the AUX input...
Page 13
����������������������������������������� This set-up is used for ������ ��� ��� ��� ����� ���� Hart Dynamics Studio � � � ����� ���� ��������� Master, Studio Master 5.3, Custom A, Mega Pro and Hart Pro 5.3 Drumsets. With this configuration, the Ride and Bell triggers on the ride cymbal are plugged in to 2 separate inputs via the AUX input...
Page 15
����������������������������������������� ��� ��� ��� ����� ���� ������ �� ���� ����� ���� �������� ��� ����������������������������������������� This set-up is used for Hart Dynamics Studio Master, Studio Master 5.3, Custom A, Mega Pro and Hart Pro 5.3 Drumsets. ������ �� ��� ��� ��� �����...
Page 18
HART DYNAMICS, INC. (HDI) Guarantees all Electracoustic® Percussion Products* against defects in material and/or workmanship for the life of the product** purchased from an authorized HDI reseller. All guarantee claims must be processed directly through HDI. HDI Electracoustic® Percussion Products are manufactured to patented design specifications for transducer protection (where applicable) and utmost durability.
Need help?
Do you have a question about the MEGAPRO TE3.2 and is the answer not in the manual?
Questions and answers