Option Menu - Sharp AQUOS CD-BA250 Operation Manual

Option menu

Option
■ Output volume select
Allows you to select what controls the audio output.
Selected item
• Sound via speakers is adjusted with
Fixed
VOL k/l on the remote control unit
or the TV.
• Sound via the AUDIO OUT terminal is
not adjustable and constantly outputs.
• Sound via the AUDIO OUT terminal
Variable
is adjusted with VOL k/l on the
remote control unit or the TV.
• Sound via speakers is muted.
NOTE
• When "Output volume select" is set to "Variable", all Audio
menu item cannot be adjusted.
■ Input select
For setting the signal type of external equipment.
Input source
INPUT4 Component, Video
■ Audio select (HDMI input mode only)
You must select HDMI+Analogue if uses the AUDIO IN
(R/L) jack for analogue audio input when using INPUT 2
(HDMI) terminal.
Option
• Select "HDMI (Digital)" if the Devices
HDMI (Digital)
(DVD, Blu ray Player, Set Top Box or
etc) is connected using HDMI cable to
INPUT 2 (HDMI) terminal.
• Select "HDMI+Analogue" if the
HDMI+Analogue
Devices (PC or etc) is connected using
DVI/HDMI convert cable to INPUT 2
(HDMI) terminal and AUDIO IN (R/L)
jack is used to input Analogue Audio
Signals.
Output volume select
4
Input select
4
Audio select
Auto volume
Digital audio output
4
Speaker selection
Audio only
4
Colour system
4
Fine Sync.
Description
Selectable item
Description
HDMI (Digital)
DVD player/PC
HDMI+Analogue
PC
■ Auto volume
Different sound sources, fairly often do not have the
same volume level, for example the changing from movie
to the advertisements. Auto volume solves this problem
and equalises the volume levels. (On, Off)
■ Digital audio output
This function allows you to select your favourite audio
output system. (PCM, Auto, Off)
■ Speaker selection
You can choose to listen to the external amplifier audio
only. (On, Off)
NOTE
• This function only available when "Link operation" is set to
"On".
• You need to use CEC compatible amplifier to control external
speaker volume.
■ Audio only
When listening to music from a music programme, you
can set the display off and enjoy audio only.
Selected item
On Audio is output without screen image.
Both screen images and audio are
Off
output.
NOTE
• When you make operations that change the picture on the TV
such as by changing the input source, the Audio only function
is set to "Off".
■ Colour system
You can change the colour system to one that is
compatible with the image on the screen. (Auto, PAL,
SECAM, NTSC 3.58, NTSC 4.43, PAL-60)
NOTE
• If "Auto" is selected, colour system for each channel is
automatically set. If an image does not display clearly, select
another colour system (e.g. PAL, NTSC 4.43).
• "Colour system" is selectable only when inputting a
composite signal.
Description
15