Option Menu - Sharp LC-40LE360X Operation Manual

On-Screen Display Menu
Audio description (DTV input mode only)
This function allows you to adjust volume output of
audio description if the TV receives a signal including
audio description.
1
Press MENU and the MENU screen displays.
2
Press c / d to select "
" (Setup).
3 Press a /b to select "Digital setup", and then
press ENTER.
4 Press a /b to select "Audio description", and
then press ENTER.
5
Press c / d to select the volume.
Switching the multi audio languages
Each time you press MPX on the remote control, the
audio language switches.
1st audio language
1st audio language
+AD (if available)
2nd audio language
2nd audio language
• • • •
+AD (if available)
NOTE
• This function is valid only if broadcaster is transmitting audio
description.
Displaying subtitles for the hearing impaired
You can display subtitles for the hearing impaired in
the Teletext broadcast if the subtitle languages are
available.
1
Press MENU and the MENU screen displays.
2
Press c / d to select "
" (Setup).
3
Press a /b to select "Digital setup", and then
press ENTER.
4
Press a /b to select "Subtitle", and then press
ENTER.
5 Press a /b to select "1st language" or "2nd
language".
6
Press c / d to select the desired language.
NOTE
• If subtitles for the selected language are not included in
a received broadcast, subtitles will not be shown for that
language.
Switching subtitle languages (DVB Subtitle)
Each time you press [ on the remote control,
the subtitle switches when the broadcast contains
subtitle information.
Set "Hearing impaired" to "On"
(Hearing impaired) 1st language
Off 2nd language
• • • • • • • •
Set "Hearing impaired" to "Off"
1st language 2nd language
Off
(Hearing impaired)
• • • •
NOTE
• This function is valid only if broadcaster is transmitting
multilingual subtitles.
Time zone
This function enables you to select your local time
zone.
1
Press MENU and the MENU screen displays.
2
Press c / d to select "
" (Setup).
3 Press a /b to select "Digital setup", and then
press ENTER.
4
Press a /b to select "Time zone", and then press
ENTER.
5
Press c / d to select the desired time zone.
NOTE
• This function lets you select the right time zone in case the
time displayed in the EPG does not match the local time of
your area.
• Time zone differ depending on the selected country.
H Identification
You can check the current version of the software on
the screen.
H Reset
If complex adjustments are made and the settings
cannot be restored to normal, you can reset the
settings to the factory preset values.
NOTE
• If you execute "Reset", all the settings such as "Picture",
"Audio" and "Programme setup" will be reset to the factory
preset values.

Option menu

H Output volume select
Allows you to select what controls the audio output.
Selected item Description
Fixed • Sound via speakers is adjusted with
VOLk/l on the remote control unit
or the TV.
• Sound via the AUDIO OUT terminal is
not adjustable and constantly outputs.
Variable • Sound via the AUDIO OUT terminal
is adjusted with VOLk/l on the
remote control unit or the TV.
• Sound via speakers is muted.
NOTE
• When "Output volume select" is set to "Variable", all Audio
menu item cannot be adjusted.
H Input select
For setting the signal type of external equipment.
Input source Selectable item
INPUT6 COMPONENT, VIDEO
H Audio select (HDMI input mode only)
You must select HDMI+Analogue if uses the AUDIO
IN (R/L) jack for analogue audio input when using
INPUT 5 (HDMI) terminal.
Option Description
HDMI (Digital) Select "HDMI (Digital)" if the Devices
(DVD, Blu ray Player, Set Top Box or
etc.) is connected using HDMI cable to
INPUT 5 (HDMI) terminal.
HDMI+ Select "HDMI+Analogue" if the Devices
Analogue (PC or etc.) is connected using DVI/
HDMI convert cable to INPUT 5 (HDMI)
terminal and AUDIO IN (R/L) jack is used
to input Analogue Audio Signals.
HDMI (Digital)
5
INPUT 5
DIGITAL
OUTPUT AUDIO
INPUT 1 1
ARC
INPUT 8 8
ANALOGUE
RGB (PC)
COMPONENT/AV INPUT INPUT 6 6
R - AUDIO - L VIDEO/Y P B B (C R ) P ) R (C
R - AUDIO - L
AUDIO OUT INPUT 7 R - AUDIO - L VIDEO
7
USB 2
DC5V 0.5A
DVD player/PC
HDMI+Analogue
AUDIO IN
INPUT 5
PC
H Auto volume
Different sound sources, fairly often do not have the
same volume level, for example the changing from
movie to the advertisements. Auto volume solves this
problem and equalises the volume levels. (On, Off)
H Digital audio output
This function allows you to select your favourite audio
output system. (PCM, Auto, Off)
H Speaker selection
You can choose to listen to the external amplifi er
audio only. (On, Off)
NOTE
• This function only available when "Link operation" is set to
"On".
• You need to use CEC compatible amplifi er to control
external speaker volume.
H Audio only
When listening to music from a music programme,
you can set the display off and enjoy audio only.
Selected item Description
On Audio is output without screen image.
Off Both screen images and audio are
output.
NOTE
• When you make operations that change the picture on the
TV such as by changing the input source, the "Audio only"
function is set to "Off".
H Colour system
You can change the colour system to one that is
USB 1
DC5V 1.5A
5
8 2
AUDIO IN MHL
DC5V 0.9A
POWER
RS-232C IOIOI
compatible with the image on the screen. (Auto,
3
PAL, SECAM, NTSC 3.58, NTSC 4.43, PAL-60)
INPUT 5 5 INPUT 4 4
OUTPUT
DC5V 1.5A
NOTE
• If "Auto" is selected, colour system for each channel is
automatically set. If an image does not display clearly,
select another colour system (e.g. PAL, NTSC 4.43).
• "Colour system" is selectable only when inputting a
composite signal.
5
8
USB 1
DIGITAL AUDIO
OUTPUT DC5V 1.5A
INPUT 1 1 5 8
ARC AUDIO IN MHL 2
INPUT 8 8 DC5V 0.9A
ANALOGUE RGB (PC)
5 INPUT 6 6 RS-232C IOIOI POWER
R - AUDIO - L VIDEO/Y COMPONENT/AV INPUT
P B B (C ) P (C R ) R
R - AUDIO - L R - AUDIO - L
AUDIO OUT INPUT 7 7 VIDEO 3
USB 2
INPUT 5 5 INPUT 4 4
OUTPUT
DC5V 0.5A DC5V 1.5A
- 9