System Connections - Sharp CD-SW300H Operation Manual

System connections (continued)
CD-SW300H
CD-SW330H
Placing the speaker system
There is no distinction between the right and left speakers.
Subwoofer
Floor
Note:
The speaker grilles are not removable.
AC power connection
After checking all the connections have been made correctly, plug
the AC power lead of this unit into the wall socket. If you plug in the
unit first, the unit will enter the demonstration mode.
AC INPUT
Notes:
The unit will start the tape initialisation when plugged in to the wall
socket. During this process, initialising sound will be heard and
the unit cannot be turned on. Wait until the process is finished.
Unplug the AC power lead from the wall socket if the unit will not
be in use for a prolonged period of time.
Cooling fan:
The main unit is built with a cooling fan at the rear of the unit for
improved cooling. Please do not cover the opening of the fan with
any obstacles, as this will block proper ventilation.
12
Left speaker Main unit Right speaker
Table
Wall socket
(AC 230 V, 50 Hz)
AC INPUT
Demonstration mode
The first time the unit is plugged in, the
unit will enter the demonstration mode.
You will see words scroll and the sub-
woofer and front speaker will light up in
flashing mode.
To cancel the demonstration mode:
When the unit is in the power
stand-by mode (demonstration
mode), press the X-BASS (SUR-
ROUND)/DEMO button. The unit
will enter the low power consump-
tion mode and the subwoofer and
front speaker light up will be off.
To return to the demonstration mode:
When the unit is in the power stand-by mode, press the X-BASS
(SURROUND)/DEMO button again.
Note:
When the power is on, the X-BASS (SURROUND)/DEMO button can
be used to select the extra bass mode.
External FM aerial
Use an external FM aerial if you require better reception. Consult
your dealer.
ANTENNA
FM
GND AM
75 OHMS
75 ohms
coaxial cable
Note:
When an external FM aerial is used, disconnect the supplied FM
aerial wire.
External
FM aerial