Black & Decker Power On Board JS450CP Instruction Manual page 5

JS450CP ManualEN 062807.qxp
• This system is designed to be used only on vehicles with a 12 volt DC battery system. Do not
connect to a 6 volt or 24 volt battery system.
• This system is not designed to be used as a replacement for a vehicular battery. Do not attempt to
operate a vehicle that does not have a battery installed.
• Excessive engine cranking can damage a vehicle's starter motor. If the engine fails to start after the
recommended number of attempts, discontinue jump-start procedures and look for other problems
that may need to be corrected.
• Do not use this jump-starter on a watercraft. It is not qualified for marine applications.
• Although this unit contains a non-spillable battery, it is recommended that unit be kept upright
during storage, use and recharging. To avoid possible damage that may shorten the unit's working
life, protect it from direct sunlight, direct heat and/or moisture.
• Read And Understand This Instruction Manual Before Using This Unit.
WARNING: TO REDUCE THE RISK OF INJURY:
Follow these instructions and those published by the battery manufacturer and manufacturer of any equipment you
intend to use with this unit. Review cautionary markings on these products and on engine.
INTRODUCTION
Thank you for choosing the Power on Board
unique in the amount of energy it can supply for its size. The internal battery is a high density sealed, lead-acid
battery that stores and delivers energy comparable to full sized ordinary jump-starters. Please read this guide
carefully before use to ensure optimum performance and avoid damage to the unit or items that you are using it
with.
The Power on Board ® Jump-Starter With Inflator is a compact, durable, portable jump-start system for
vehicles that have a standard 12 volt battery system. This self-contained, rechargeable system will start most
vehicles without the need for a host vehicle or 12 volt DC power supply. It can also be used as a portable
source of 12 volt DC electric power in remote locations and/or emergency situations. It is ideal for use with 12
volt DC cordless, portable, rechargeable products and DC/AC power inverters.
FEATURES
• Keyless ON/OFF Power Switch
• C o r d l e s s / r e c h a r g e a b l e
• Built-in non-spillable, maintenance-free, heavy duty, sealed, lead-acid battery
• Requires no maintenance (other than recharging) for optimum operation
• Heavy duty cables and clamps
• 12 Volt DC Outlet for powering/recharging 12 volt DC appliances
• Reverse polarity connection warning indicator
• Exclusive cable storage channels keep jumper cables out of the way until needed
• Built-in 120 Volt AC Charger (uses a standard extension cord, not included)
• Easy-to-read LED battery charge status indicators
• Built-in portable inflator for vehicle tires, trailer tires and recreational inflatables
9/26/08 12:42 PM
SAVE THESE INSTRUCTIONS
® Jump-Starter With Inflator. This compact jump-starter is
4
Page 4