Husky HSK065HD Owner's Manual & Warranty page 3

To ensure reliable service, your power inverter must be installed and used properly.
Please read the installation and operating instructions thoroughly prior to installation
and use. Pay particular attention to the WARNING and CAUTION statements in this
manual. The CAUTION statements advise against certain conditions and practices that
may result in damage to your inverter. The WARNING statements identify conditions
or practices that may result in personal injury.
Read All Instructions Before Using This Power Inverter!
WARNINGS:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, EXPLOSION OR INJURY:
• Do not connect to AC distribution wiring
• Remove appliance plug from outlet strip or turn off inverter before working on the
appliance. Multiple outlet power strips with switches and circuit breakers only
interrupt power to the "hot" receptacle terminals. The "neutral" terminals remain
powered with respect to the "ground" terminals
• NOT approved for ignition protected areas. Do not make any electrical connections
or disconnections in areas designated as IGNITION PROTECTED
• This is not a toy - keep away from children
CAUTIONS:
• Do not use with positive ground electrical systems (the majority of modern automobiles,
RVs, trucks and boats are negative ground). Reverse polarity connection will result in a
blown fuse and may cause permanent damage to the inverter and will void warranty
• This inverter will not operate high wattage appliances or equipment that produce heat,
such as hair dryers, microwave ovens and toasters
• Grounding the Neutral will cause the inverter to shut down. Do not operate this inverter
if it is wet. Do not install in engine compartment - install in a well ventilated area
• This inverter is not tested for use with medical devices
IMPORTANT CABLE INFORMATION
Substantial power loss and reduced battery operating time results from inverters installed with
cables that are not able to supply full power. Symptoms of low battery power can result from
cables that are either excessively long or an insufficient gauge. Marine installations are also
subjected to vibration and stresses that exceed those of other mobile installations. Therefore,
the installer/operator should be especially aware of the requirements to maintain secure, tight,
water-resistant electrical connections and to provide for strain relief for DC cables and
appliance wiring. Cable insulation must be the appropriate type for the environment.
CAUTION: Always inspect battery supply connections and cables to ensure they are tight and
that cable insulation is not damaged.
IMPORTANT SAFETY INSTRUCTIONS
3