Important Safety Reminders; Getting To Know Your Cleaner; Assembling Your Cleaner - Hoover FREESPACE EVO Instruction Manual

IMPORTANT SAfETy REMINDERS

This cleaner should only be used for domestic cleaning, as described in this user guide. Please
ensure that this guide is fully understood before operating the appliance. Use only attachments
recommended or supplied by Hoover.
WarninG: Electricity can be extremely dangerous. This appliance is double insulated and
must not be earthed. This plug is fitted with a 13 amp fuse (UK only).
important: The wires in the mains power lead are coloured in accordance with the following
code:
Blue – neutral Brown – Live
StatiC ELECtriCitY: Some carpets can cause a small build up of static electricity. Any static
discharge is not hazardous to health.
aFtEr USE: Switch the cleaner off and remove the plug from the electricity supply.
Always switch off and remove the plug before cleaning the appliance or attempting any
maintenance task.
SaFEtY With ChiLdrEn, ELdErLY or thE inFirm: Do not let children play with the
appliance or its controls. Please supervise the use of the appliance by older children, the elderly
or the infirm.
hooVEr SErViCE: To ensure the continued safe and efficient operation of this appliance we
recommend that any servicing or repairs are only carried out by an authorised Hoover service
engineer.
IT IS IMPORTANT THAT yOU DO NOT:
• Position the cleaner above you when cleaning the stairs.
• Use your cleaner out of doors or on any wet surface or for wet pick up.
• Pick up hard or sharp objects, matches, hot ashes, cigarette ends or other similar
items.
• Spray with or pick up flammable liquids, cleaning fluids, aerosols or their vapours as this
may cause risk of fire / explosion.
• Run over the supply cord when using your cleaner or remove the plug by pulling on the
supply cord.
• Stand on or wrap the power cord around arms or legs when using the cleaner.
• Use the appliance to clean people or animals.
• Continue to use your cleaner if it appears to be faulty. If the supply cord is damaged
stop using the cleaner IMMEDIATELy. To avoid a safety hazard, an authorised Hoover
service engineer must replace the supply cord.
FreespaceEvo__1-4_union.indd 1

GETTING TO KNOw yOUR CLEANER

A. Cleaner main body
B. On/Off & Variable Power Control Roller
C. Bag Check Indicator
D. Bag Door Release Buttons
E. Hose Latch
f. Handle
G. Telescopic Tube
H. Telescopic Tube Adjusters
I. Hose
J. Handle Hook
K. Telescopic Tube Parking Hook
L. Hose Release Buttons
M. Carpet & floor Nozzle
N. floor Type Selector
O. Crevice Tool
P. Dusting Brush
Q. Nozzle Parking Slot
R. Telescopic Tube Parking Slot
S. Parquet Caresse Nozzle*
T. Pet Hair Remover Mini Turbo Nozzle*
U. Allergen Remover Mini Turbo Nozzle*
V. Grand Turbo Nozzle*

ASSEMBLING yOUR CLEANER

Remove all components from the packaging.
1. Connect the hose to the cleaner main body, ensuring it clips and locks into position. To
release: simply press the two buttons on the hose end and pull. [2]
2. Connect the handle to the tube upper end
3. Connect the carpet and floor nozzle to the tube lower end.
1
GB
[3].
[4]
(*Certain Models Only)
16-04-2010 16:24:27