Safety Cut-Out - Zanussi ZKT 863 LX Installation And Operating Instructions Manual

Switching off the acoustic signal
Step
1.
Acoustic signal stops.

Safety cut-out

Cooking surface
• If after switching on the cooking surface, a heat setting is not set for a
cooking zone within approx. 10 seconds, the cooking surface automati-
cally switches itself off.
• If one or more sensor fields are covered by objects (a pan, cloths, etc.) for
longer than approx. 10 seconds, a signal sounds and the cooking surface
switches off automatically.
• If all cooking zones are switched off, the cooking surface automatically
switches itself off after approx. 10 seconds.
Control panel
• When the appliance is switched off, if one or more of the sensor fields on
the control panel are covered for more that 10 seconds, an acoustic signal
sounds. The acoustic signal switches itself off automatically when the
sensor fields are no longer covered.
Cooking zones
• If one of the cooking zones is not switched off after a certain time, or if the
heat setting is not modified, the relevant cooking zone switches off auto-
matically. _ is displayed. Before being used again, the cooking zone must
be set to 0.
Heat setting
v, 1 - 2
3 - 4
5
6 - 9
14
Control panel field
Touch
Switches off after
6 hours
5 hours
4 hours
1.5 hours
Acoustic signal
Acoustic signal to acknowledge.