Digital Displays; Safety Cut-Out Function For The Cooking Zones - Zanussi ZKT 863 LX Installation And Operating Instructions Manual

Digital displays

The four display fields, which are assigned to the
four cooking zones, display:
– ¾ after being switched on,
– u when the keep warm setting has been selected,
– ¿ to Ç, depending on the heat setting selected,
– a when using automatic cooking,
– h for residual heat,
– l when the child lock is activated,
– e with a fault
1
Safety cut-out function
for the cooking zones
If one of the cooking zones is not switched off after a
certain period of time or the cooking setting is not al-
tered, that particular cooking zone will automatically
switch itself off.
Any residual warmth will be indicated with h (as for
"hot") in the digital displays corresponding to the
particular cooking zones.
The cooking zones switch themselves off when:
• Heat setting u, 1 - 2 after 6 hours
• Heat setting 3 - 4
• Heat setting
• Heat setting 6 - 9
3
Should one or more cooking zones switch
themselves off before the periods of time indi-
cated have elapsed, see the chapter "What to
do if ...".
Other causes for a cooking zone
switching itself off
All cooking zones will immediately switch them-
selves off if liquid boils over and lands on the control
panel.
The same thing will happen if you place a damp cloth
on the control panel. In both instances, after the liq-
uid or cloth has been removed, the appliance will
need to be switched on again using the main switch
.
after 5 hours
5 after 4 hours
after 1.5 hours
7