Chapter 7. Troubleshooting And Diagnostics; Basic Troubleshooting - Lenovo S310 User Manual

F0af and 10151
Hide thumbs Also See for S310:
Table of Contents

Advertisement

Chapter 7. Troubleshooting and diagnostics

This chapter provides information about diagnosing and troubleshooting computer problems.

Basic troubleshooting

The following table provides information to help you troubleshoot your computer problems.
Note: If you cannot correct the problem, have the computer serviced. For a list of service and support
telephone numbers, refer to the Safety, Warranty, and Setup Guide that comes with your computer or go to
the Lenovo Support Web site at http://www.lenovo.com/support/phone.
Symptom
The computer does not start
when you press the power
switch.
The monitor screen is blank.
The keyboard does not work.
The mouse does not work.
The operating system does not
start.
The computer beeps multiple
times before the operating
system starts.
© Copyright Lenovo 2013
Verify that:
• The power cord is correctly connected to the rear of the computer and to a
working electrical outlet.
• If your computer has a secondary power switch on the rear of the computer,
make sure that it is switched on.
• The power indicator on the front of the computer is on.
• The computer voltage matches the voltage available at the electrical outlet for
your country or region.
Verify that:
• The monitor signal cable is correctly connected to the monitor and to the
appropriate monitor connector on the computer.
• The monitor power cord is correctly connected to the monitor and to a working
electrical outlet.
• The monitor is turned on and the brightness and contrast controls are set
correctly.
• The computer voltage matches the voltage available at the electrical outlet for
your country or region.
• If your computer has two monitor connectors, be sure to use the connector
on the graphics card.
Verify that:
• The computer is turned on.
• The keyboard is securely connected to a USB connector on the computer.
• No keys are stuck.
Verify that:
• The computer is turned on.
• The mouse is securely connected to a USB connector on the computer.
• The mouse is clean. Refer to "Optical mouse" on page 23 for further information.
Verify that:
• The startup sequence includes the device where the operating system resides.
Usually, the operating system is on the hard disk drive. For more information,
see "Selecting a startup device" on page 17.
Verify that no keys are stuck.
Action
25

Advertisement

Table of Contents
loading

Table of Contents