Exiting The Setup Utility Program - Lenovo S310 User Manual

By enabling Better Acoustic Performance, your computer will run with less noise at a normal thermal
level. By enabling Better Thermal Performance, your computer will run at a better thermal level with
normal acoustic performance.
To switch between better acoustic performance and better thermal performance, do the following:
1. Start the Setup Utility program. See "Starting the Setup Utility program" on page 15.
2. From the Setup Utility program main menu, select Power.
3. Select Smart Performance Choice. The Smart Performance Choice window is displayed.
4. Select Better Acoustic Performance or Better Thermal Performance as desired.
5. Press F10 to save your setting and exit the Setup Utility program. See "Exiting the Setup Utility
program" on page 19.

Exiting the Setup Utility program

After you finish viewing or changing settings, press Esc to return to the Setup Utility program main menu.
You might have to press Esc several times. Do one of the following:
• If you want to save the new settings, press F10 to save changes and exit the Setup Utility program.
• If you do not want to save the settings, select Exit ➙ Discard Changes and Exit, and then press Enter.
When the Reset Without Saving window shows, select Yes, and then press Enter to exit the Setup
Utility program.
• If you want to return to the default settings, press F9 to load the default settings, and then press F10 to
save and exit the Setup Utility program.
.
Chapter 5 Using the Setup Utility program
19