Additional Information; Troubleshooting; Additional Information Troubleshooting; Error Messages - Pioneer DEH-6200BT Operation Manual

Appendix

Additional Information

Troubleshooting

General
Symptom Cause
The display You did not per-
automatically form any opera-
returns to the tion within about
ordinary dis- 30 seconds.
play.
The repeat play Depending on
range changes the repeat play
unexpectedly. range, the se-
lected range may
change when se-
lecting another
folder or track, or
when fast for-
warding/rever-
sing.
A subfolder is Subfolders can-
not played not be played
back. when Folder
(folder repeat) is
selected.
NO XXXX ap- There is no text
pears when a information em-
display is chan- bedded.
ged (NO
TRACK TTL, for
example).
The display is Demo mode is
illuminated on.
when the unit
is turned off.
The unit is mal- You are using a
functioning. device, such as a
There is inter- cellular phone,
ference. that transmits
electromagnetic
waves near the
unit.
22
En
Action (Refer-
ence page)
Perform operation
again.
Select the repeat
play range again.
Select another re-
peat play range.
Switch the display
or play another
track/file.
Press /DISP/
SCRL to cancel
demo mode.
Move electrical de-
vices that may be
causing the inter-
ference away from
the unit.

Error messages

When you contact your dealer or your nearest
Pioneer Service Center, be sure to note the
error message.
Built-in CD Player
Message Cause
ERROR-11, 12, The disc is dirty.
17, 30
The disc is
scratched.
ERROR-10, 11,
There is an elec-
12, 15, 17, 30,
trical or mechan-
A0 ical error.
ERROR-15 The inserted disc
is blank
ERROR-22, 23
Unsupported CD
format
Format Read
Sometimes there
is a delay be-
tween the start of
playback and
when you start to
hear any sound.
NO AUDIO The inserted disc
does not contain
any playable
files.
SKIPPED
The inserted disc
contains DRM
protected WMA
files.
PROTECT All the files on
the inserted disc
are embedded
with DRM.
USB storage device
Message Cause
NO DEVICE When plug and
play is off, no
USB storage de-
vice is con-
nected.
Action
Clean the disc.
Replace the disc.
Turn the ignition
switch OFF and
back ON, or switch
to a different
source, then back
to the CD player.
Replace the disc.
Replace the disc.
Wait until the mes-
sage disappears
and you hear
sound.
Replace the disc.
Replace the disc.
Replace the disc.
Action
! Turn the plug
and play on.
! Connect a com-
patible USB sto-
rage device.