Unregister Handsets; Restore Default Settings - Philips XL300 User Manual

3
Select [SERVICES] > [REGISTER], then
/OK to confirm.
press
4
Enter the system PIN. Press
make corrections. Then press
confirm the PIN.
Note
•
For models with an answering machine, you hear a
confirmation beep.
» Registration is complete in less than 2
minutes. The base automatically assigns
a handset number to the handset.
Note
•
If the PIN is incorrect or no base is found within a
certain period, your handset displays a notification
message. Repeat the above procedure if registration
fails.
Note
•
The preset PIN is 0000. No change can be made on it.

Unregister handsets

If two handsets share the same base station, you
can unregister a handset with another handset.
1
/MENU /
Press
access the main menu.
2
Select [SERVICES] > [UNREGISTER],
/OK to confirm.
then press
3
Enter the system PIN. (The preset PIN
is 0000). Press
number.
4
Select the handset number to be
unregistered.
5
/OK to confirm.
Press
» The handset is unregistered.
/ to
/OK to
in standby mode to
/
to remove the
Tip
•
The handset number displays beside the handset name
in standby mode.

Restore default settings

You can reset your phone settings to the
original factory settings.
1
Press /MENU /
access the main menu.
2
Select [SERVICES] > [RESET], then press
/OK to confirm.
» A confirmation request is displayed on
the handset.
3
Press /OK to confirm.
» All settings are reset.
in standby mode to
EN 33