TM
PSI23MGN—GE Profile Arctica
Door Panel Dimensions
Order your own custom wood panels to match cabinetry or other decor.
Fresh Food Freezer Panel
Panels
With Dispenser
G-67-9/32"
C-17-7/8"
E-33-5/8"
23 cu. ft.
H-19-15/32"
D-14-15/32"
F-14-15/32"
Panels up to 1/4" thick will fit door frame with no special preparation.
Add filler behind material thinner than 1/4" for proper fit.
Note: Panels up to 3/4" will require special routing area around handles.
Dimensions may vary depending on depth of panel.
Freezer Panel
Freezer Panel
Without Dispenser
With Dispenser
Cut
Cut
out
1/8
out
5/16
5/16
17-7/8
67-9/32
FRONT
14-15/32
IMPORTANT: Before finalizing specifications for your GE Profile
CustomStyle Refrigerator, please NOTE:
• A minimum of 36-1/8" is required for refrigerator installation with collar
• Be sure to allow for 1/2" or 3/4" side panels in addition to the 36-1/8" minimum
Specification Created 11/01
™
22.7 Cu. Ft. CustomStyle
Freezer Panel
Without Dispenser
Weight Limits*
A-67-9/32"
Fresh Food = 38 lbs.
B-14-15/32"
Freezer = 28 lbs.
*Total weight of panels
(i.e., both freezer panels)
Fresh Food
Panel
1/8
1/8
14-15/32
67-9/32
FRONT
FRONT
14-15/32
19-15/32
33-5/8
™
Side-by-Side Refrigerator with Dispenser
Detail C
1/8"
Cut
out
(Fresh Food panel shown)
Notch required at top
corner as noted.
5/16
Panels 1/4" thick
or less
All other dotted lines indicate
areas that must be routed out
about 5/32" (4 mm) on the back
side of panels 1/4" (6 mm) thick
or more. For panels less than
1/4" (6 mm) thick, these areas
5/16"
can be cut out of the filler panel.
1/4"
1/4" Max.
For answers to your Monogram,
GE appliance questions, visit our website at
GEAppliances.com or call
GE Answer Center
VOLUME and
SHELF AREA
Manufacturer Certified to
ASSOCIATION OF HOME
APPLIANCE MANUFACTURERS
ANSI/AHAN HRF-1-1979
Depth of
material to be
routed out
1-1/8"
5/32"
Front
®
GE Profile
™
or
®
service, 800.626.2000.
Total volume and shelf
area are calculated by the
Listed by
Association of Home
Underwriters
Appliance Manufacturers'
Laboratories
R
standards.
Need help?
Do you have a question about the GE Profile Arctica PSI23MGN and is the answer not in the manual?