2 : 0
I 0
6 : 5
I 2
2 4 I : 9
5 : 0
5
6 : 0
2
2 5 I : 1
18
SETTINGS
___________________________________________________
Setting the clock
When you first use the device, you first have to set the clock.
1
With the device switched off, keep pressing »MODE« until the time
flashes in the display.
Note:
If you do not press any button within 3 seconds, the device will quit set-
up mode. Any altered settings will be stored.
Press
»–
TUNING« briefly to set the hours step-by-step or hold it down
2
to run through the hours quickly.
+
Press »
TUNING« briefly to set the minutes step-by-step or hold it
3
down to run through the minutes quickly.
4
Press »MODE« to confirm the setting.
– Display: the current time.
Setting the alarm time
1
Press »ON/OFF« to switch off the device.
– Display: the current time.
Press »MODE« briefly.
2
– Display: the alarm time most recently set, »
Keep pressing »MODE« until the alarm time flashes in the display.
3
Note:
If you do not press any button within 3 seconds, the device will quit
set-up mode. Any altered settings will be stored.
4
Press
»–
TUNING« briefly to set the hours step-by step or hold it down
to run through the hours quickly.
Press »
+
TUNING« briefly to set the minutes step-by-step or hold it
5
down to run through the minutes quickly.
Press »MODE« to confirm the setting.
6
– Display: the set alarm time, »
– After a short time, the display changes to the current time.
« or »e« flashes.
« or »e« flash.