Operating The Alarms; Setting Alarm-1 For Cd Track Or Beeping Alarm Sound; Setting Alarm-2 Time For Am/Fm Radio - Timex T618 Operation Manual

This clock radio features a triple alarm system, with three alarms that can be operated independently. Alarm-1
features a choice of a CD tracks or a beeping alarm sound, Alarm-2 features a radio alarm wake sound, and
Alarm-3 features a nature wake sound. You can set any combination of the three alarms. In addition, each
alarm features a 7-5-2 setting that lets you set the alarm in advance for a full week, the workweek, or the weekend.

Setting Alarm-1 for CD Track or Beeping Alarm Sound

1. Press and hold the
the flashing display. The display will flash for ten seconds before returning to the standard clock display.
2. Press the Reverse or
will advance or reverse the time rapidly. Be sure to set the correct AM/PM time, as shown by the PM
Indicator on the display.
3. After setting the Alarm-1 time, insert a CD into the CD Player and use the
the track that will play at the set time. To wake to a beeping alarm sound, leave the CD Player empty. Adjust
the volume using the
4. After setting the wake time and sound, you will need to select your 7-5-2 setting. The 7-5-2 setting lets you
set the alarm for a full week, weekdays only, or the weekend. Before setting the alarm, be sure that you have
set the correct date, as shown in the Setting the Calendar section of this manual. While the display is still
flashing, press the
5. After you have programmed the Alarm-1 settings, press the
to the clock display. The Alarm-1 Indicator will appear on the display, showing that the alarm is set.
Setting Alarm-2 for AM/FM Radio
1. Press and hold the
2. Press the Reverse or
3. Use the Band Button and the
information on programming radio stations into memory, see the Programming Radio Station Settings section
of this manual. Adjust the volume using the
4. See Note #4 in the previous section for instructions on setting the 7-5-2 alarm setting for Alarm-2.
5. After you have programmed the Alarm-2 settings, press the
to the clock display. The Alarm-2 Indicator will appear on the display, showing that the alarm is set.

Operating the Alarms

Alarm-1 Button until the Alarm-1 settings and Wake Track Indicator appear on
Forward Button to set the Alarm-1 time. Holding a button for a few seconds
Volume Buttons.
Date Set/7-5-2 Button until the desired setting is shown at the top of the display.
Alarm-2 Button until the Alarm-2 settings and radio frequency appear on the display.
Forward Button to set the Alarm-2 time.
Memory Set Buttons to select a radio station to wake to. For more
Enter Button or wait ten seconds to return
Volume Buttons.
Enter Button or wait ten seconds to return
13
Wake Track Button to select