Canon Powershot A75 User Manual page 128

Troubleshooting
Problem
The subject comes Light is shining or reflecting into
out overexposed the camera.
(too bright).
The flash mode is set so that the
flash always fire.
A vertical bar of The subject is too bright.
light (red, purple)
appears on the
LCD monitor.
White dots or Light from the flash has reflected
white asterisks off dust particles or insects in the
appear on the air. This occurs more frequently in
image. the following conditions:
- When shooting at the wide angle
end.
- When shooting with a high
aperture value in the aperture-
priority AE mode.
The flash doesn't The flash mode is set to flash off
fire. mode.
126
Cause Solution
Adjust the camera angle.
Set the flash to any other mode except on.
This is a normal occurrence in devices
containing CCDs and does not constitute a
malfunction. (This red bar of light will not be
recorded when shooting still photos, but it will
be recorded when shooting movies.)
This is a phenomenon that occurs with digital
cameras and does not constitute a
malfunction.
Set the flash mode to any other mode except
Off.