Canon Powershot A75 User Manual page 108

Various Functions
IMPORTANT
You must install the software and driver bundled
on the supplied Canon Digital Camera Solution
Disk onto your computer before connecting the
camera to a computer.
The camera will not operate correctly if you
connect it to your computer before installing
the driver and software. If this happens,
please refer to the Troubleshooting section
of the Canon Digital Camera Software
Starter Guide Disk.
You do not need to turn off the camera
or computer power when making a USB
connection.
Please refer to your computer's manual
for information regarding the location of
the USB port.
You are recommended to use new AA
size batteries, fully charged AA size
NiMH batteries or AC Adapter Kit
ACK600 (sold separately) to power the
camera when connecting to a computer
(p. 128, 130).
106
All procedures performed with a
connection to a USB 2.0 compliant
board are not guaranteed.
1
Install the driver and the software
applications bundled on the Canon
Digital Camera Solution Disk.
Please see the Canon Digital Camera
Software Starter Guide Disk for the
installation procedures.
2
Use the supplied interface cable
to connect the computer's USB
port to the camera's DIGITAL
terminal.
Interface cable
USB
port