Wb Bracketing - Canon EOS 1D Mark III Instruction Manual

White Balance Auto Bracketing
With just one shot, three images having a different color tone can be
recorded simultaneously. Based on the color temperature of the current
white balance setting, the image will be bracketed with a blue/amber
bias or magenta/green bias. This is called white balance bracketing
(WB-BKT). White balance bracketing is possible up to ±3 levels in
single-level increments.
B/A bias ±3 levels
Bracketing Sequence
Correct white balance, blue (B) bias, and amber (A) bias. Or, correct
white balance, magenta (M) bias, and green (G) bias.
During WB bracketing, the maximum burst for continuous shooting will be
lower and the number of possible shots will also decrease to one-third the
normal number. Also, the white balance icon will blink on the rear LCD panel.
You can also set white balance correction and AEB together with white
balance bracketing. If you set AEB in combination with white balance
bracketing, a total of nine images will be recorded for a single shot.
Since three images are recorded for one shot, the memory card will take
longer to record the shot.
"BKT" stands for Bracketing.
3 White Balance Correction
Set the white balance bracketing
amount.
In step 2 for white balance correction,
when you turn the <5> dial, the " "
mark on the screen will change to "
(3 points). Turning the dial to the right
sets the B/A bracketing, and turning it to
the left sets the M/G bracketing.
On the right side of the screen, "BKT"
indicates the bracketing direction and
the bracketing amount is also displayed.
Press <0> to exit and return to the menu.
To cancel the bracketing, set "BKT" to
"±0" (" " becomes " " (1 point)).
"
71