Sun joe CJ601E Operator's Manual

Sun joe CJ601E Operator's Manual

Electric wood chipper/shredder

Advertisement

A Division of Snow Joe, LLC
IMPORTANT!

Safety Instructions

All Operators Must Read These
Instructions Before Use
Always follow these safety guidelines. Failure to do so may
result in serious bodily injury or death.
Safety Precautions
TO REDUCE RISK OF INJURY: Before any use be sure
everyone using this product reads and understands all safety
instructions and other information contained in this manual.
m
WARNING!
Wear appropriate personal hearing
protection during use. Under some conditions and duration of
use, noise from this product may contribute to hearing loss.
m
WARNING!
When using electric gardening
appliances, basic safety precautions should always be
followed to reduce risk of fire, electric shock, and/or
personal injury.
Save these instructions and review frequently prior to use
and in instructing others.
General Safety
• AVOID DANGEROUS ENVIRONMENTS – Don't use this
product in rainy, stormy, damp or wet locations. Do not
operate in gaseous or explosive atmospheres. Motors in
these products normally spark, and the sparks might
ignite fumes.
• DRESS PROPERLY – Don't wear loose clothing or jewelry
and wear protective hair covering to contain long hair.
They can be caught in moving parts. Use of rubber
gloves and substantial footwear is recommended
when working outdoors.
• USE SAFETY GLASSES – Wear safety glasses with side
shields or goggles that are marked to comply with ANSI
Z87.1 standard when operating this product.
• USE DUST MASK – Wear face or dust mask when
operating this product.
• USE HEARING PROTECTION – Wear ear plugs or muffs
when operating this product.
• GROUND FAULT CIRCUIT INTERRUPTER – (GFCI) pro-
tection should be provided on the circuit(s) or outlet(s) to
be used for this product if you are using an extension cord.
Receptacles are available having built-in GFCI protection
and may be used.
© 2012 by Snow Joe, LLC
All rights reserved. Original instructions.
Electric Wood Chipper/Shredder
Electric Wood Chipper/Shredder
Model No. CJ601E
• DOUBLE INSULATION – This product has double insula-
tion. This means that all external metal parts are insulated
from the electrical supply. This is achieved by introducing
an insulation layer between electrical and mechanical
parts. The double insulation guarantees you the greatest
possible safety.
• EXTENSION CORD – Make sure your extension cord is
in good condition. Use only extension cords having an
electrical rating not less than the rating of the product. An
undersized extension cord will cause a drop in line voltage
resulting in loss of power and overheating.
• POLARIZED PLUGS – To reduce the risk of electric shock,
this product has a polarized plug (one blade is wider than
the other). This product must be used with a suitable
polarized extension cord. Polarized connections will fit to-
gether only one way. Make sure that the receptacle end of
the extension cord has large and small blade slot widths. If
the plug does not fit fully into the extension cord, reverse
the plug. If it still does not fit, obtain a suitable extension
cord. Do not change the tool plug or extension cord in any
way.
m
WARNING:
Use outdoor extension cords marked
SW-A, SOW-A, STW-A, STOW-A, SJW-A, SJTW-A, or
SJTOWA. These cords are rated for outdoor use and reduce
the risk of electric shock.
• DISCONNECT UNIT from the power supply when not
in use or when servicing or cleaning. Do not leave unat-
tended.
• DON'T ABUSE CORD – Never carry or pull this product by
the cord or yank the cord to disconnect from the recepta-
cle. Keep cord from heat, oil, and sharp edges.
• STAY ALERT – Watch what you are doing. Use common
sense. Do not operate the garden shredder when you are
tired or under the influence of drugs or medication.
• STORE IDLE UNIT INDOORS – When not in use, the
garden shredder should be stored indoors in a dry and
high or locked-up place, out of children's reach.
• MAINTAIN UNIT WITH CARE – Keep clean for best
performance and to reduce the risk of injury. Inspect
extension cord periodically and replace if damaged. Keep
handles dry, clean and free from oil and grease.
• CHECK FOR DAMAGED PARTS – Before further use of
the product, any part that is damaged should be care-
fully checked to determine that it will operate properly
and perform its intended function. Check for alignment
of moving parts, binding of moving parts, breakage of
parts, mounting and any other condition that may affect
its operation. Any part that is damaged should be properly
repaired or replaced. Call our customer service help line
for assistance at 1-866-766-9563 for assistance.
SAVE THESE INSTRUCTIONS
1
Form No. SJ-CJ601E-880E
OPERATOR'S MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CJ601E and is the answer not in the manual?

Questions and answers

Ed
March 30, 2025

What is the wattage of CJ601E ?

User image 67e96cf168d72
1 comments:
Mr. Anderson
March 31, 2025

The wattage of the Sun Joe CJ601E is not provided in the context.

This answer is automatically generated

Summary of Contents for Sun joe CJ601E

  • Page 1: Safety Instructions

    Electric Wood Chipper/Shredder Electric Wood Chipper/Shredder Model No. CJ601E Form No. SJ-CJ601E-880E OPERATOR’S MANUAL A Division of Snow Joe, LLC IMPORTANT! • DOUBLE INSULATION – This product has double insula- tion. This means that all external metal parts are insulated from the electrical supply.
  • Page 2: Electrical Safety

    • LIGHTING – Only operate your garden shredder in daylight or good artificial light. • DON’T OVERREACH – Keep proper footing and balance at all times. Wear oil resistant rubber soled footwear. METAL SCREW • Never leave a running tool unattended. Turn the garden shredder off and wait until it comes to a complete stop COVER OF GROUNDED OUTLET BOX...
  • Page 3: Personal Safety

    will draw. An undersized extension cord will cause a drop 16. Don’t Overreach – Keep proper footing and balance at in line voltage resulting in loss of power and overheating. all times. Table 1 shows the correct size to use depending on cord 17.
  • Page 4: Operating Tips

    loose clothes, jewelry or long hair can be caught in moving Remember that the starting mechanism on engine parts. powered tools will cause the cutting mechanism to move. • If devices are provided for the connection of dust extrac- 12. Keep all guards and deflectors in place and in good tion and collection facilities, ensure these are connected working condition.
  • Page 5: Safety Symbols

    Safety Symbols The following table depicts and describes safety symbols that may appear on this product. Read, understand, and follow all instructions on the machine before attempting to assemble and operate. Symbol Description SAFETY ALERT READ THE OPERATOR’S MANUAL(S) Read, understand and follow all instructions in the manual(s) before attempting to assemble and operate.
  • Page 6: Technical Data

    Know Your Electric Wood Chipper/Shredder 1. Hopper Locking Knob 7. Main Body 2. Reset Button 8. Power On/Off Trigger Switch 3. Motor 9. Paddle 4. Stand Assembly 10. Paddle Holder 5. Axle 11. Wheels (two) 6. Hopper Technical Data Rated voltage 120V AC 60Hz 14A No Load Speed 4,300/RPM...
  • Page 7 Assembly Fig. 5 1. Remove all parts from package. 2. Check all the parts against the list in the manual. If any parts are damaged or missing do not use the wood chipper/shredder until the part is repaired or replaced. Call our customer service help line at 1-866-766-9563 for assistance.
  • Page 8: Operation

    Operation starting it accidently (See Fig. 8). The shredder cannot be started when the safety switch is removed. Starting (Fig. 8) Blades Make sure the switch is in the OFF position. Plug the garden The blades on the rotary plate are reversible. For quality and shredder into a suitable outlet using an approved extension safety reasons, we recommend that only identical replacement cord if necessary.
  • Page 9: Maintenance

    Maintenance Fig. 9 (D) Hopper Locking Knob WARNING! Always turn off the garden shredder and unplug the power cord from the outlet before maintaining the shredder. WARNING! Always wear gloves when cleaning. 1. Cleaning garden shredder: (See Fig. 9) a) Unscrew the hopper locking knob (D) counter clockwise and open the hopper.
  • Page 10: Troubleshooting

    Troubleshooting Problems Possible Cause Possible Solution - Power failure/unit not plugged into - Check to make sure unit is plugged into a working The motor does not a working receptacle. outlet. Make sure extension cord is not damaged. run. - The overload protection has - Remove any chips and press the reset button.
  • Page 11 NOTES...
  • Page 12 A Two-Year Full Warranty for residential use in the United States and Canada General Conditions: Snow Joe, LLC warrants this product to the original purchaser for two years against defects in material or workmanship when used for normal residential purposes. Snow Joe, LLC will repair any defect in material or workmanship, and repair or replace any defective part, subject to the conditions, limitations, and exclusions set forth herein.

This manual is also suitable for:

Chipper joe cj601e

Table of Contents

Save PDF