Baby Lock BND9-2 Instructions page 3

Baby Lock Endurance 2 (Model BND9-2) Update History
 Version 4.20 update provided the following changes.
1. Fixed the situation where the embroidery pattern was not rotated 180 degrees if the
embroidery frame was changed from a cap frame to a different type of frame or from a
different type of frame to a cap frame when the machine finished sewing the pattern using
the Link function.
2. The starting/ ending position settings are changed to the center of pattern when using
Clamp Frame SR or Clamp Frame SL.
Copyright  2004-2013 Baby Lock USA
Customer Support: 1-800-313-4110
BND9-2 Ver. 4.21 Software Update – p.3