Baby Lock BND9-2 Instructions page 2

Note:
The number of pages in the Settings screen will vary depending on the program version in your
machine.
5. If the version shown on your machine is already Version 4.21 or later, it is not necessary to
update your machine with the program on this page.
How to download the update program
1. Create a temporary folder on your computer (ex. C:\Temp) to save the update program file to be
downloaded.
2. Click the "DOWNLOAD FILE" below.
3. Select the previously created temporary folder (ex. C:\Temp) where the downloaded file should
be stored.
4. Download the file.
Download FILE
How to update your machine's software
The following two methods are available to update your machine's software.
1. Update procedure using USB Flash Drive (USB Flash memory)
2. Update procedure using a computer connection (USB Function)
Follow the procedure described in the instruction manual.
Instruction PDF

When using USB Flash Drive (USB Flash memory) to update the machine's
software, check that no data except for the update file is saved on the USB Flash
Drive (USB Flash memory) being used before beginning update.

When using a computer connection to update the machine's software, check your
computer's operating system.
USB functionality is only available to be used with Microsoft Windows Me/
2000/ XP/ Vista/ 7/ 8.
(UPF File size: 87.3 MB)
(File size: 522KB)
* * * NOTE * * *
Copyright  2004-2013 Baby Lock USA
Customer Support: 1-800-313-4110
BND9-2 Ver. 4.21 Software Update – p.2