Panel Information - Miele T 8003 Dimension Manual

Panel Information

Integrated Laundry
T8019Ci Decor Unit
These units come equipped with a full size white front panel. These units are also designed to either accept a thin insert or
a custom front panel supplied by the custom cabinet maker.
Sizes are as follows:
Hinge Notches
In certain installations, notches will be required to
accomodate the hinges in the front panel.
Note: To insure access to customer servicable features,
a minimum 4" toe kick above finished floor (AFF)
is required.
Miele
Decor
Laundry unit
Control
Panel
3 7/8"
Miele
Decor
Laundry
To center lines
Version 1 - Thin insert
Width:
Thickness:
Height:
With this version, a thin white frame will be exposed after
installation
Version 2 - Custom Front Panel
Width:
Thickness:
Height:
With this version, the existing front panel is removed and
replaced by the new custom panel
C
16 3/4"
C
23 1/4" for all machines
up to 1/8"
25" in all cases
23 3/8" for all machines
up to 3/4"
Up to 25"
Notch Pattern
For this installation, drill the following
pattern in the appropriate locations.
1/4" Ø
1 3/8" Ø
1/4" Ø
1 1/8"
Drill all holes
to a 5/8" depth
NOTE: Drawing is not to scale.
SPECIFICATION SHEETS 08262011
7/8"
1"
C
1"