Installing the water line.
Read these instructions completely and carefully.
Connect the Tubing to the Refrigerator
Before making the connection to the refrigerator, be sure the
refrigerator power cord is not plugged into the wall outlet.
We recommend installing a water filter if your water supply has sand or particles
that could clog the screen of the refrigerator's water valve. Install it in the water
line near the refrigerator.
Remove the plastic flexible cap from the water valve.
1
Place the compression nut and ferrule (sleeve) onto the end of the tubing as
2
shown.
Insert the end of the copper tubing into the water valve connection as far as
3
possible. While holding the tubing, tighten the fitting.
Fasten the copper tubing into the clamp provided to hold it in position.
4
You may need to pry open the clamp.
28
1/4 Copper Tubing
1/4 Compression Nut
Tubing Clamp
Ferrule (sleeve)
Refrigerator Connection