Adobe FRAMEMAKER 10 User Manual page 286

Example:
Font word spread value (0x33)
Specification by data type:
Description of data:
Size of data in bytes:
Default value:
Example:
Specifications of object op codes
This section describes each object op code. Op codes are listed by number and description. The op code number is
shown in parentheses.
Ellipse (0x80)
Specification by data type:
Description of data:
Size of data in bytes:
Example:
Polygon (0x81)
Specification by data type:
Description of data:
Size of data in bytes:
32 00000004 00008000
for a font kerning of 50% of an em downward (0.50)
32 00000004 FFFF8000
for a font kerning of 50% of an em upward (-0.50)
Metric
Percentage of spread
4
default word spread
33 00000004 00008000
for a word spread of 50% (0.50)
33 00000004 FFFF8000
for a word spread of -50% (-0.50)
Rectangle
Position and size of ellipse in points
16
80 00000010 01320000 00240000 007E0000 007E0000
for an ellipse with the following specifications:
x position = 306 points (0132)
y position = 36 points (0024)
width = 126 points (007E)
height = 126 points (007E)
Long, point, ..., point
Number of points (long)
Position of each point in points (point, ..., point)
Variable
ADOBE FRAMEMAKER 10 281
MIF Reference