Power Mode; Media Player - Hama Wireless Laser Presenter Operating Instruction

5. Inserting a MicroSD card
The USB receiver contains a MicroSD card reader
If the MicroSD card is left in the USB receiver, it can be
used as a USB memory stick.
Please note that a MicroSD card is not included.
a) Open the card reader by applying a little pressure to
slide the cover in the indicated direction (fi g.5).
b) Pull the metallic holder up to open it (fi g. 6).
c) Insert the MicroSD card (fi g.7) into the card reader
correctly. Close the metallic holder and press it
down slightly until you hear the cover click into
position.
d) Close the card reader (fi g. 8).
(fi g.5)
(fi g.7)
MICRO SD
Card
(fi g.6)
(fi g.8)
6
00052407man_de_en_fr.indd Abs2:6 00052407man_de_en_fr.indd Abs2:6
6. Functions
6.1 Display

1 Power Mode

On/off switch
Press for 2 seconds to switch on
(green LED lights up) and for 3
seconds to switch off (green LED
goes out).
Changing the mode:
Press briefl y to change modes.
The LED of the chosen mode lights
up green.
2 Laser Pointer
Pressing the button activates the
green laser beam.
3 Keyboard
LED is on when the
mode keyboard mode is active
4 Mouse mode
LED is on when the
mouse mode is active

5 Media Player

LED is on when
mode media player mode is active
Warning:
Never point the laser beam into another person's eyes or
your own eyes; doing so may cause retinal injuries.
1 Power mode
2 Laser pointer
3 Keyboard
4 Mouse
5 Media player
(fi g.9)
29.03.10 15:24 29.03.10 15:24