Installing The Scanner; Connecting The Cables - Fujitsu fi-6800 Getting Started Manual

2.
Insert the Setup DVD-ROM into the DVD
drive.
The [fi Series Setup] screen appears.
If the [fi Series Setup] screen does not
appear, double-click "Setup.exe" in
the Setup DVD-ROM via Windows
Explorer or [Computer].
3.
Click the scanner model.
4.
Click the [INSTALL (Recommended)]
button.
5.
Follow the instructions on the screen to
proceed with the installation.
■ Installation (Custom)
1.
Perform steps 1. to 3. in
(Recommended)" (page
2.
Click the [Installation (Custom)] button.
3.
Select the check box for the software to
install and click the [Next] button.
4.
Follow the instructions on the screen to
proceed with the installation.
"Installation
3).
4

Installing the Scanner

Place the scanner at its installation site.
460
460
(18.11)
460 460
860
(33.86)
The scanner weight is 32 kg (70.56 lb).
You must not carry it alone.
Carry the scanner by supporting it from
the bottom.

Connecting the Cables

The following describes how to connect the cables
between the scanner and your computer.
2
1.
Make sure that the computer is turned
OFF.
394
(15.51)
350 3 3 5 5 0 350
310
(12.20) (12.20)
430 430
(16.93)
430
1630
(64.17)
Unit: mm (in.)
Scanner's Dimensions
Installation Space
SCSI Connector
USB Connector
SCSI ID
3
Power Cable
SCSI Cable
1
USB Cable