Sanyo Xacti VPC-SH1EX Quick Manual

QUICK GUIDE

1AG6P1P5616-- SG412EX, U, GX, PX, TA (1209AB-SD)
STEP 2
CAPTURE A STILL IMAGE
Dual Camera
VPC-SH1EX
VPC-SH1
VPC-SH1GX
VPC-SH1PX
VPC-SH1TA
Printed in Vietnam
1
Turn on the camera.
2 Press the [O]
button.
You can capture a still
image while recording
a video clip.
During video clip
recording, press the
[O] button to capture
a still image of the
scene at that instant.
RECORD A VIDEO CLIP
If the image is not captured...
Is there enough power left in the battery? Recharge
the battery pack.
(See "Insert the battery pack" on the reverse side.)
VIEWING IMAGES
STEP 1
Turn on the camera.
1
Press the ON/OFF
button for at least
1 second.
If the screen to set
the date and time
appears, press the
MENU button 2
times to cancel it.
2 Press the [R]
button to begin
recording a video
clip.
To stop recording,
press the [R]
button again.
STEP 3
Press the REC/PLAY
1
button.
The last recorded
image is displayed.
2
Select the image to
play back.
Toggle the SET button
left, right, up or down
to move the orange
frame to the fi le you
wish to play back.
3
Press the SET button.
The image you
selected in step
displayed fullscreen.
If a video clip was
selected, playback
begins.
is
2