Throughput Monitor - TP-Link TL-WA830RE User Manual

Figure 4-20 Statistics of the device attached wireless stations
Operation Mode - Shows the current operation mode

MAC Address - Shows the connected wireless station's MAC address

Current Status - The connected wireless station's running status, one of STA-AUTH /

STA-ASSOC / STA-JOINED / WPA / WPA-PSK / WPA2 / WPA2-PSK / AP-UP / AP-DOWN /
Disconnected
Received Packets - packets received by the station

Sent Packets - packets sent by the station

You cannot change any of the values on this page. To update this page and to show the current
connected wireless stations, click the Refresh button.
If the numbers of connected wireless stations go beyond one page, click the Next button to go to
the next page and click the Previous button to return the previous page.

Note:
This page will be refreshed automatically every 5 seconds.

4.5.6 Throughput Monitor

Selecting Wireless > Throughput Monitor will helps to watch wireless throughput information in
the following screen shown in Figure 4-21.
TL-WA830RE 300Mbps Wireless N Range Extender User Guide
35