Advertisement
Quick Links
Advertisement
Related Manuals for Pinnacle PR MAN QB REV0113
Summary of Contents for Pinnacle PR MAN QB REV0113
- Page 1 Powered Subwoofer Owner’s Manual 2013 PINNACLE LOUDSPEAKERS...
- Page 3 ® We congratulate and thank you for choosing a PINNACLE subwoofer. Our subwoofers exemplify the best in modern audio technology, and are designed to produce remarkable amounts of deep bass. Please read this manual completely to ensure the best possible performance from your Home Theater or sound system.
- Page 4 PLACEMENT: Recommended Subwoofer Placement: a) Within a few inches of the room corner closest to your left or right front speaker (maximum low bass output); b) Against the wall between your left and right front speakers (strong low bass output with optimal blending to front speakers);...
- Page 5 CONNECTION OPTION #1 - Using The Line Input(s): To use the subwoofer’s LINE INPUT(s) your receiver must have a dedicated "subwoofer output" jack (sometimes called Sub Out, Low Pass or LFE), or pre-amp left & right channel outputs. If your receiver has these outputs you may connect your subwoofer using standard RCA cable(s) (the same kind of audio cable used to connect a CD player or tape deck, etc.).
- Page 6 CONNECTION OPTION #2 - Using The Binding Post Inputs: There are two reasons to use this connection option. The first is if your receiver has no subwoofer output jack! The second is if your system would benefit from having the bass filtered out of the main speakers (if you have a Dolby Digital receiver, you can achieve the same results electronically simply by configuring your main speakers as SMALL and connecting your subwoofer using an RCA cable - see Connection Option #1).
- Page 7 POWER-UP AND TONE CONTROL ADJUSTMENTS: Plug your subwoofer into any ordinary wall outlet. Since your subwoofer can require up to 800 Watts of power, do not plug the subwoofer into any outlet that cannot deliver 800 Watts (like those on the back of other electronic equipment such as your receiver).
-
Page 8: Very Important
With high volume levels of certain types of signals, the subwoofer may be audibly strained. If you hear the subwoofer “breaking-up” or distorting, turn your receiver’s volume level down. ® If you have any problems or questions please contact your PINNACLE dealer for further assistance. -
Page 9: Troubleshooting
TROUBLESHOOTING: No Sound only from Subwoofer - Please note that this subwoofer has a thermal protection feature which will shut off its amplifier if it gets too hot; it will turn itself back on when it has cooled sufficiently. Otherwise: Check subwoofer power / volume settings and all connections. Ensure that the center channel mode on the receiver is in the NORMAL or SMALL position. - Page 10 Parts replacement and labor will be performed at the discretion of Pinnacle Loudspeakers and will be provided free of charge unless (in the opinion of our service department, service representatives, or engineering department) the system has failed due to abuse or negligent operation.
- Page 12 415 Oser Ave, Suite M Hauppauge, NY 11788 www.pinnaclespeakers.com PR MAN QB REV0113...