Error Messages; Route Setting Information; Route Search Specifications - Pioneer CNDV-50MT Operation Manual

Dvd map
Hide thumbs Also See for CNDV-50MT:
Table of Contents

Advertisement

MAN-CNDV-50MT-EN.book Page 124 Wednesday, May 4, 2005 1:49 PM

Error Messages

When problems occur with disc playback, an error message appears on the display. Refer to the table
below to identify the problem, then take the suggested corrective action. If the error persists, contact
your dealer or your nearest PIONEER Service Centre.
The messages in "( )" will appear on the sub-display.
Message
Cause
Error-02
Dirty
(ERROR-20, ERROR-
Scratched disc
21, ERROR-22)
The disc is loaded upside down
Error-05-82
Electrical or mechanical
(ERROR-50)
DIFFERENT REGION
The disc does not have the same region
DISC (REGION ERR)
number as this unit
NON PLAYABLE DISC
This type of disc cannot be played by this
(NON-PLAY)
unit
THERMAL
The temperature of this unit is outside of
PROTECTION IN
the normal operating range
MOTION (TEMP)

Route Setting Information

Route search specifications

Your Navigation System sets a route to your
destination by applying certain built-in rules to
the map data. This section provides some useful
information about how a route is set.
• When a route is calculated, the route and
voice guidance for the route is
automatically set. Also, for day or time
traffic regulations, only information about
traffic regulations at the time when the
route was calculated is shown. One-way
streets and street closures may not be
taken into consideration. For example, if a
street is open during the morning only, but
you arrive later, it would be against the
traffic regulations so you cannot drive
along the set route. When driving, please
follow the actual traffic signs. Also, the
system may not know some traffic
regulations.
• Upgrade Navigation DVDs are available
for purchase from your local Pioneer
dealer that includes the most current map
and point of interest information. Contact
your local Pioneer dealer for details.
124
Action (See)
Clean disc.
Replace disc.
Check that the disc is loaded correctly.
Press RESET button. ("Hardware manual"
and refer to page 116 in this manual.)
Replace the DVD-Video with one bearing the
correct region number.
Replace the disc with one this unit can play.
Wait until the unit's temperature returns to
within normal operating limits.
About the route condition
When the calculation of only one route is set, you
can search a route option by combining the
following conditions.
How to set the calculation conditions
Page 33
For example, when "Fast" and "Avoid
Motorway" ("On") are combined, the route,
which avoids motorway, and has the shortest
travel time, will be calculated and displayed on
the screen.
Condition 1: whether to put priority on the
distance, or time
Short:
Calculate a route with the shortest distance to
your destination as a priority.
Fast:
Calculate a route with the shortest travel time to
your destination as a priority.
Condition 2: whether to use motorway or not
Avoid Motorway:
Calculate a route that avoids motorway. (A route
using the motorway may be set if your destination
is far away.)

Advertisement

Table of Contents
loading

Table of Contents