Maintenance - Makita 6704D Instruction Manual

For 6706D and 6706DW
When the battery capacity decreases to a certain
level, the motor will not start even if you press the
switch trigger. This mechanism prevents poor fasten-
ing caused by battery voltage-drop. Charge the bat-
tery cartridge to resume operation.
NOTE:
• Always use the correct size socket for bolts and
nuts. An incorrect size socket will result in inaccu-
rate and inconsistent fastening torque and/or dam-
age to the bolt or nut.
• Hold the machine with its square drive pointed
straight at the bolt or nut, or the bolt or nut will be
damaged.
• If the motor will not start even after you pull the
trigger, release the trigger. Then pull the trigger
again after turning the socket slightly with your
fingers.
6

MAINTENANCE

CAUTION:
Always be sure that the machine is switched off and
the battery cartridge is removed before carrying out
any work on the machine.
To maintain product safety and reliability, repairs,
maintenance or adjustment should be carried out by a
Makita Authorized Service Center.
GUARANTEE
We guarantee Makita machines in accordance with
statutory/country-specific regulations. Damage attrib-
utable to normal wear and tear, overload or improper
handling will be excluded from the guarantee. In case
of complaint, please send the machine, undismantled,
with the enclosed GUARANTEE CERTIFICATE, to
your dealer or the Makita Service Center.